Submission Preparation ChecklistAs part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
- The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
- The submission file is in OpenOffice, Microsoft Word, or RTF document file format.
- Where available, URLs for the references have been provided.
- The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
- The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines.
International Journal of Health and Pharmaceutical (IJHP) is an open access journal, The journal charge for publication. All content is freely available without charge to any user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author.
Concerning the permission for copyrighted images used in your manuscript, this is entirely your responsibility (whether they’ll be screenshots – e.g. of a scene from a game, photos, figures, tables, graphics, etc.).
Only ORIGINAL and Previously Unpublished manuscripts will be accepted for publication in International Journal of Health and Pharmaceutical (IJHP) . Upon acceptance of your manuscript, you will be required to sign a warranty that your manuscript is original and has not been submitted for publication or published elsewhere.
All manuscripts will be evaluated by at least 2 independent reviewers and will be checked with a plagiarism detector software. Single blind peer review (Reviewers know the authors name, Reviewers are secret for authors).
Style and Format
The papers shall be written entirely in English; they must have minimum 4000 and maximum 12000 words and must comply exactly with the instructions bellow.
Papers which do not comply with the formatting conditions described bellow will be returned to the authors and will only be taken into consideration for final reviewing when they fulfill the mentioned standards.
he papers must be written clearly, concise, without any ambiguities.
You are requested to identify who provided financial support for the development of the research and/or preparation of the article. This will be included at the end of the paper.
Please write your text in good English (American or British usage is accepted, but not a mixture of these).
Submission to this journal proceeds totally online. The main text is required in DOC file (Word) with the tables included. The figures are required to be inserted with captions at their indicated position in the text (JPEG/TIFF) with high resolution.
When submitting the manuscript, is please include, a cover letter to the editor, as separate file, or mention the following statements in the body of email:
– all the authors approved that the paper to be submitted to IJHP;
– the article is original and is the work of the authors;
– the novelty or the significance of results.
All correspondence, including notification of the Editor’s decision and requests for revision, will be done by e-mail.
Preparation of the manuscript
*.DOC file for the manuscript is required. This should have the tables included, and the figures must me inserted with captions on their proper location in text.
Standard Page is B5 (ISO): 176 x 250 mm (6.929 x 9.843 inch), margins of 2 cm (0.8 inch). Use paragraph spacing of 1 line.
The text should be in single-column format. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the word processor’s options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts, etc. Please include figures in the text, with the caption under it. If image is composed please edit image into a single file. Please use as fonts only: Times New Roman.
Divide your article into clearly defined sections. Each heading should appear on its own separate line.
The order is: Title, Authors, Affiliation, Abstract, Keywords, Introduction, Experimental (Materials and Methods), Results and Discussions, Conclusions, Acknowledgements, References, Appendices and Funding Body.
All text should be font size 11.
Concise and informative. Avoid abbreviations and formulae where possible. Font: ALL BOLD, size 14.
Please write full names; family name will be written in CAPS (eg. John SMITH).
One Author must be clearly indicated as corresponding author (* as footnote) and it is compulsory to indicate e-mail address, telephone and fax numbers with country and area code. Font size 11.
Present the authors’ affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript number immediately after the author’s name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail address of each author. Font size 10.
A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. Use no more than 300 words.
The Abstract title: font bold Time New Roman, size 9; the abstract text – font Time New Roman, size 9.
Provide a maximum of 8 keywords, avoid general and plural terms and use only abbreviations firmly established in the field. These keywords will be used for indexing purposes. The Keywords title: font bold Time New Roman, size 9; the keywords – font Time New Roman, size 9.
State the objectives of the work and provide an adequate background from literature.
Experimental (or Materials and Methods)
The experimental methods should be described after the introductory material. Detailed experimental descriptions should be restricted to one section of the paper. Sufficient detail should be given to allow any experienced worker to implement the procedures described. Procedural steps should not be numbered.
Results and Discussions
Results should be clear and concise. This should explore the significance of the results of the work, not repeat them. Avoid extensive citations and discussion of published literature.
This should include key findings of the research, quantitative analytical performance figures (if appropriate) and their significance.
Define all abbreviations at their first appearance in the text. Ensure consistency of abbreviations throughout the article.
Insert acknowledgements only in a separate section at the end of the article before the references. List here those individuals who provided help during the research.
If there is more than one appendix, they should be identified as A, B, etc.
Present simple formulae in the line of normal text wherever possible and use the solidus (/) instead of a horizontal line for small fractional terms, e.g., A/B. Number consecutively any equations that have to be displayed separately from the text.
Nomenclature, abbreviations and symbols
Please use SI units (eg. L for liters). Always leave a space between units. Do not use abbreviations in the title or keywords. Define abbreviations that are not standard in this field at their first occurrence in both the abstract and the main text.
• Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations as “graphics” or enclose the font.
• Only use the following fonts in your illustrations: Arial, Times, Symbol.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Produce images near to the desired size of the printed version.
• Provide JPEG/TIFF files, NOT lower than 300DPI.
If with your accepted article you submit color figures then we assure, at no additional charge, that these figures will appear in color on electronic format.
The figures must be included on their position in the text. Use in line with text – setting for image (do not use text wrapping). Make sure that the figures to be cited in text (Fig. 1).
Provide captions of the figures next to them, use Times New Roman, size 11.
Example of figure caption: Fig. 1. SEM image of the surface: 500X
Number tables consecutively in accordance with their appearance in the text. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article. Please use Times New Roman, size 11.
Example of table caption: Table 1. The EDX composition of the obtained layer.
Please make sure that every reference cited in the text is also present in the reference list (and vice versa). Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text.
Please provide for Journals: Authors, Title of the paper, Journal title, volume(issue), year and pages from to.
Remember: Article/Chapter title with Time New Roman,Journal/Book/Conferences/ Workshops with Bold,
Text: Indicate references by number(s) in square brackets in line with the text. The actual authors can be referred to, but the reference number(s) must always be given.
Example: “….. the research done by by R. Donald , O. Michael and C. Ronald . A. Pantiru et al  concluded that…. and other studies [4-6]”.
List: Number the references in the list in the order in which they appear in the text.
Reference to a journal publication:
 L. Xu, C. Liu, Y. Wan, X. Wang, H. Xiao, Effects of heat treatments on microstructures and mechanical properties of Mg–4Y–2.5Nd–0.7Zr alloy, Materials Science and Engineering: A, 558, 2012, pp. 1-16.
Reference to a paper in a proceeding:
 M. Lobefaro, I.C.A. Sandu, Authentic versus faked iconography: a study on the behavior of painting materials, Proceedings of Science Meets Archaeology and Art History – Balkan Symposium on Archaeometry, 18-20 September 2008, Ohrid, Republic of Macedonia, p. 64.
Reference to a book:
 Z. Goffer, Archaeological Chemistry (second edition), John Wiley&Sons Inc., New Jersey, 2007, p. 155.
Reference to a patent:
 W. Fristad, K. Saad, Phosphate Conversion Coating Concentrate, Patent US2003209289, 2003.
Reference to a webpage:
Do not write AND between the authors, please use comma (,).
Submission – Editorial Issues
Submission to this journal proceeds totally online. The main text is required in DOC file (Word 97-2003) with the tables included. The figures are required to be inserted with captions at their indicated position in the text (JPEG/TIFF) with high resolution.
All correspondence, including notification of the Editor’s decision and requests for revision, will be done by e-mail.
An acknowledgment e-mail regarding the receipt of your manuscript will be promptly sent. The review process will take approximately 2-10 weeks, and the corresponding author will be notified concerning the possibility of publication of the manuscript as soon as the review process is completed. All correspondence will be directed to the corresponding author. It is the responsibility of the corresponding author to communicate with the other author(s). If your manuscript is accepted for publication, it will be submitted to the publisher where it will be typeset. After typesetting, you will be sent a proof of your manuscript to proofread. You will be required to return the proof within 48 hours to the publisher.
ArticlesSection default policy
Open Access Statement
International Journal of Environmental, Sustainability, and Social Science publishes fully open access journals, which means that all articles are available on the internet to all users immediately upon publication. Non-commercial use and distribution in any medium are permitted, provided the author and the journal are properly credited.
Benefits of open access for authors include:
1. Free access for all users worldwide
2. Authors retain copyright to their work
3. Increased visibility and readership
4. Rapid publication
5. No spatial constraints